Linux Installation¶

Generic Linux devices are supported via SPIDEV, MRAA, RPi native via BCM2835, or using LittleWire.

Automated Install¶

Designed & Tested on RPi - Defaults to SPIDEV on devices supporting it

1. Install prerequisites if there are any (pigpio, MRAA, LittleWire libraries, setup SPI device etc)

2. Download the install.sh file from http://tmrh20.github.io/RF24Installer/RPi/install.sh

   wget http://tmrh20.github.io/RF24Installer/RPi/install.sh
   

3. Make it executable

   chmod +x install.sh
   

4. Run it and choose your options

   ./install.sh
   

5. Run an example from one of the libraries

   cd rf24libs/RF24/examples_linux
   

   Edit the gettingstarted example, to set your pin configuration

   nano gettingstarted.cpp
   make
   sudo ./gettingstarted
   

Manual Install¶

1. Install prerequisites if there are any (pigpio, MRAA, LittleWire libraries, setup SPI device etc)

2. Make a directory to contain the RF24 and possibly RF24Network lib and enter it

   mkdir ~/rf24libs
   cd ~/rf24libs
   

3. Clone the RF24 repo

   git clone https://github.com/tmrh20/RF24.git RF24
   

4. Change to the new RF24 directory

   cd RF24
   

5. Configure build environment using

   ./configure
   

   script. It auto detectes device and build environment.

   For overriding autodetections, use command-line switches, see

   ./configure --help
   

   for description.

6. Build the library, and run an example file

   make
   sudo make install
   

cd examples_linux

Edit the gettingstarted example, to set your pin configuration

ano gettingstarted.cpp
make
sudo ./gettingstarted

Build using SPIDEV¶

1. Make sure that spi device support is enabled and /dev/spidev<a>.<b> is present

2. Manual Install using SPIDEV:

   ./configure --driver=SPIDEV
   make
   sudo make install
   

3. See the gettingstarted example for an example of pin configuration